WHEN QUALITY IS A MUST AND PRICE A CONSIDERATION
The Stumpster Co.
$7,995 FOB Houston until 12/1/13
Due to increased material and component costs
price will rise to $8,995
place your order now to save big!!!!!!
A High Performance Commercial
Quality Tree Cutter and
Team your tractor with the:
U.S. PATENT #4998573
Fells trees, up to 20"
diameter in a single cut. Cuts trees off 1" Belowground level 7' high,
hydraulically operated pusher bar. Assists in directional felling.
Pusher bar removed easily to create a low profile cutter for cleaning fence lines and hedge rows.
Quickly and easily cuts existing stumps 1" below ground level, or will grind any size stump of any type wood to 1" below ground level.
Operating RPM (PTO)
Min. PTO H.P.
Max. Stump Removal
1" below ground level*
20" (single cut)
48" dia. x 3/4" plate
*If greater cutting
depth is required,
ask your dealer for additional
information on available options.
Rugged steel frame for long service life.
Heavy duty cutting wheel. ( A 48" diameter wheel of 3/4" plate steel)
Carbide cutting bits will remove hundreds of trees between re-sharpening. Easily and quickly exchanged, replaced or sharpened.
Extra heavy gear box is designed to withstand the punishment of continuous commercial free cutting.
Double acting tie rod cylinders rated for 2500 psi continual and 4000 psi surge. C1025 steel alloy barrels, hardened rods, polyurethane wipers, 70 durometer buna 0-ring with back up rings.
Hydraulically fed cutting wheel assures a well controlled non-violent cut into trees or stumps.
Heavy steel skirts prevent flying chips and debris.
The entire cutting wheel is contained within a shroud when not cutting.
Limiter Clutch protects entire drive system.
Hydraulically controlled pusher bar assists in directional felling